MZT8 ATEX

Share:


MZT8 ATEX



At a glance

  • Can be used in all standard cylinders, linear slides, and grippers using the T-slot and – with the help of adapters – in round rod, tie-rod, and profile cylinders, and cylinders with a dovetail groove
  • Drop-in mounting from above simplifies handling and assembly
  • Locking screw combines an Allen key and slotted screw
  • Variants fulfill the requirements of ATEX categories 1D, 1G and 3D, 3G
  • Very short sensor housing for use in short stroke cylinders
  • Enclosure rating: IP 67

Your Benefits

  • Explosion protection at the highest level: NAMUR version for ATEX category 1D, 1G
  • Quick and easy mounting using an Allen key or flat-head screwdriver
  • Saves time on initial installation and when replacing devices as the sensor can be easily inserted into the slot from above. The end caps of the cylinder do not have to be removed.
  • Low maintenance costs as the sensor is resistant to shock and vibration, meaning it does not slide about in the slot

Technical data overview

Output function NO
Cylinder types with adapter Profile cylinder
Tie rod cylinder
Round body cylinder
Dovetail groove cylinder
SMC rail CDQ2
SMC rail ECDQ2
Housing length 24 mm
Supply voltage 8.2 V DC ... 20 V DC 1)
10 V DC ... 26 V DC 2)
1) According NAMUR EN 60947-5-6. Using of isolated switch amplifier with certificates of conformity for explosion areas is recommended(U ≤ 20 V, I ≤ 60 mA, P ≤ 100 mW)
2) Depend on ambient temperature. For details see operating instructions under „performance data of the sensor“.


 Inquiry - MZT8 ATEX