- Measure complex profiles with just one laser line
- Analyze up to four areas at the same time
- More than 10 integrated measurement functions, e.g., height, width, and inclination
- Sensor head and evaluation unit in one device
- Commissioning via software or integrated display with operating elements
- High-quality CMOS receiver unit
- Measuring a 2D profile with just one sensor saves on hardware and installation costs
- Cost-effective solution for 2D profile measurement
- Real-time visualization of the measurement results via the integrated LC display
- Intuitive and quick commissioning via the software or display reduces installation time
- Thanks to the stand-alone concept of the Profiler 2, there is no need for cabling or to mount an additional evaluation unit
- Reliable measuring regardless of color, material, or shape
- More than 10 integrated measurement functions allow profiles to be measured and analyzed quickly
Measuring range | 100 mm, ± 25 mm |
Resolution |
X-direction 25 µm 1) 2) Z-direction 2 µm |
Response time | 5 ms 3) |
Switching output |
3 x PNP 4) 3 x NPN 4) |
Ambient temperature |
Operation –10 °C ... +40 °C Storage –20 °C ... +60 °C |
Data interface | RS-485 5) |
1) Typical value, actual value depends on settings and environmental conditions. For details see field of view.
2) Measurement on 90 % remission (ceramic, white)
3) Typical value, high-res mode.
4) Maximum current output 100 mA.
5) Half-duplex (9.6 kbit/s ... 4 Mbit/s)
Inquiry - Profiler