Din Rail Power Supply

Product Description
The DIMENSION CP-Series units are high-end power supplies in a medium price range without compromising quality, reliability and performance. The CP-Series is part of the DIMENSION power supply family. The most outstanding features of CP10 series are the high efficiency, advanced inrush current limitation, active PFC and the wide operational temperature range.

Product Description
The Dimension CT-Series are cost optimized power supplies without compromising quality, reliability and performance. The CT-Series is part of the DIMENSION power supply family. The most outstanding features of CT5.

Product Description
Data and energy:
The primary switched mode DIN rail power supply SLA8.100 specifically supplies AS Interface® systems with energy. The AS-Interface bus technology allows to connect up to 62 participants to a control and to supply them with energy with a single two-conductor cable.

Product Description
The FPS300 is an industrial grade power supply for the 1-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection. It provides two to four stabilized outputs that are galvanically separated from the input. The negative potential of the outputs is permanently connected to PE within the unit.

Product Description
The FPS300 is an industrial grade power supply for the 1-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection. It provides two to four stabilized outputs that are galvanically separated from the input. The negative potential of the outputs is permanently connected to PE within the unit.

Product Description
The FPS300 is an industrial grade power supply for the 1-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection. It provides two to four stabilized outputs that are galvanically separated from the input. The negative potential of the outputs is permanently connected to PE within the unit.

Product Description
The FPS300 is an industrial grade power supply for the single-phase mains system incorporated in a rugged wall-mount housing with a degree of protection IP65/67. It provides one floating, stabilized SELV/PELV output, which is galvanically separated from the input.. In case of an overload or load failure, the output offers hiccup-mode.

Product Description
The most outstanding features of the DIMENSION QSeries DIN-rail power supplies are the extremely high efficiencies and the small sizes, which are achieved by a synchronous rectification and other technological designs. The QS40.484 is a device for 200-240V mains voltages.

Product Description
The most outstanding features of this Dimension QS40.481 DIN-rail power supply are the extremely high efficiency and the small size, which are achieved by a synchronous rectification, a bridgeless PFC circuit and additional unique design details.

Product Description
The most outstanding features of this Dimension QSeries DIN-rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details.

Product Description
The most outstanding features of this Dimension QSeries DIN-rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details. The QS20.244 is a device for 200-240V non-public mains only. This supports regional applications and offers additional cost and space savings.

Product Description
The most outstanding features of this Dimension QSeries DIN-rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details. The QSeries is part of the Dimension family, existing alongside the lower featured C-Series.

Product Description
The most outstanding features of this Dimension Q-Series DIN rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details. The Q-Series is part of the Dimension family, existing alongside the lower featured CSeries.

Product Description
The most outstanding features of this Dimension Q-Series DIN rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details. The Q-Series is part of the Dimension family, existing alongside the lower featured CSeries.

Product Description
The PIM90.245 is a DIN rail mountable single-phaseinput power supply, which provides a floating, stabilized and galvanically separated SELV/PELV/ES1 output voltage. The device is equipped with screw terminals, which are optimized for large wire sizes.

Product Description
The PIM60.245 is a DIN rail mountable single-phaseinput power supply, which provides a floating, stabilized and galvanically separated SELV/PELV/ES1 output voltage. The output fulfils the requirements for a limited power source according to NEC CLASS 2. The device is equipped with Screw terminals, which are optimized for large wire sizes.

Product Description
The PIM60.241 is a DIN rail mountable single-phaseinput power supply, which provides a floating, stabilized and galvanically separated SELV/PELV/ES1 output voltage. The output fulfils the requirements for a limited power source according to NEC CLASS 2. The device is equipped with Push-in terminals, which are optimized for automated wiring.

Product Description
The PIM60.125 is a DIN rail mountable single-phaseinput power supply, which provides a floating, stabilized and galvanically separated SELV/PELV/ES1 output voltage. The output fulfils the requirements for a limited power source according to NEC CLASS 2. The device is equipped with screw terminals, which are optimized for large wire sizes.

Product Description
The PIM60.121 is a DIN rail mountable single-phaseinput power supply, which provides a floating, stabilized and galvanically separated SELV/PELV/ES1 output voltage. The output fulfils the requirements for a limited power source according to NEC CLASS 2. The device is equipped with push-in terminals, which are optimized for automated wiring.

Product Description
The PIM36.241 is a DIN rail mountable single-phaseinput power supply, which provides a floating, stabilized and galvanically separated SELV/PELV/ES1 output voltage. The output fulfils the requirements for a limited power source according to NEC CLASS 2. The device is equipped with push-in terminals, which are optimized for automated wiring.

Product Description
These PIANO series units are extraordinarily compact, industrial grade power supplies that focus on the essential features needed in today’s industrial applications. The excellent cost/performance ratio presents many new and exciting opportunities without compromising quality or reliability.

Product Description
These PIANO series units are extraordinarily compact, industrial grade power supplies that focus on the essential features needed in today’s industrial applications. The excellent cost/performance ratio presents many new and exciting opportunities without compromising quality or reliability.

Product Description
These PIANO series units are extraordinarily compact, industrial grade power supplies that focus on the essential features needed in today’s industrial applications. The excellent cost/performance ratio presents many new and exciting opportunities without compromising quality or reliability.

Product Description
These PIANO series units are extraordinarily compact, industrial grade power supplies that focus on the essential features needed in today’s industrial applications. The excellent cost/performance ratio presents many new and exciting opportunities without compromising quality or reliability.

Product Description
These PIANO series units are extraordinarily compact, industrial grade power supplies that focus on the essential features needed in today’s industrial applications. The excellent cost/performance ratio presents many new and exciting opportunities without compromising quality or reliability.

Product Description
Mounted and connected in record time, no tools required
World-wide approvals (UL, EN, CSA, CB Scheme) for industry and office/ home
Tiny: WxHxD = 73 x 75 x 103mm
Adjustable output voltage up to DC 56V
115/230V Auto Select Input
PULS Overload Design™ (high output overload capability)
Selectable single/parallel

Product Description
Adjustable output voltage up to DC 24-28V
PULS Overload Design™ (high output overload capability)
115/230V Auto Select Input
Limited Power Source, NEC class 2 and Hazardous Location Class I Div.

Product Description
Mounted and connected in record time, no tools required
World-wide approvals (UL, EN, CSA, CB Scheme) for industry and office/ home
Tiny: WxHxD = 45 x 75 x 91 mm
NEC Class 2 Power Supply
Adjustable output voltage up to DC 28V
Input: AC 115/230V switchable (Manual Select Input)
PULS Overload Design™ (High output

Product Description
A compact size, light weight, simple mounting onto the DIN-rail and the utilization of only quality components are what makes the MiniLine power supplies so easy to use and install within seconds. A rugged electrical and mechanical design as well as a high immunity against electrical disturbances on the mains provides reliable output power.