Sick Penang distributor

The authority on gloss
The Glare sensor is specially designed to recognize and differentiate objects on the basis of their gloss in order to control production processes.

The economic standard for use in industrial environments
SICK’s inductive sensors offer precise detection, less downtime and a long service life. The inductive IME sensors pack high technology into the smallest of spaces. The integrated ASIC chip enables digital adjustment after the end of the manufacturing process.

Reed contact cylinder sensors for T-slot
The SICK RZT7 cylinder sensor with reed contact reliably detects the piston position in pneumatic drives. The RZT7 can be mounted directly into all cylinders with standard T-slots. SICK also has an extensive range of adapters which enable the RZT7 to be used with other cylinder types.

Simple, flexible detection
The GLL170 fiber-optic sensor is the reliable solution for all detection tasks in combination with the fibers in the LL3 product family. With its simple operating concept, the sensor is ideal for applications in harsh environments as well as when rapid response times are crucial.

Great flexibility in a small housing
Move to a position with pinpoint accuracy: The OLM100 enables quick ramp-up and ramp-down times, optimizing work processes. Fast travel speeds, high repeatability, and fast output rates make the OLM100 ideal for many applications, such as electrical overhead conveyors, rotating tables, and transport skids.

High performance in a small housing
The OLM100 Hi is a high performance variant of the well-known OLM100. The strengths of the OLM100 Hi include very high travel speeds, extremely precise repeatability, and an SSI interface for direct feedback into drive.

Innovative positioning with fieldbus interfaces
Linear measurement sensors from SICK can determine an accurate position on product travel paths of up to 10 km in length – along a straight line or curve. The OLM200 combines extreme precision and high travel speeds with fieldbus interfaces.

Easily and reliably detecting double films
Detecting double layers in film stack processes, e.g. in battery production, is a huge challenge. The new IDF double film sensors reliably detect whether a suction gripper has picked up one or several films and ensure that the unwanted double film is immediately sorted out.

The simple and intelligent way of speed monitoring
The SAM sensor is the simple and intelligent way of speed monitoring with an additional IO-Link interface. SAM can be used as a classic speed monitor or innovative acceleration monitor with a revolutionary speed-independent monitoring function.

The economic standard for use in industrial environments
The IQE sensors are the economic standard for all types of automation task. They combine compact design with precise detection, high reliability, and a good price-performance ratio.

High-pressure-resistant sensors for hydraulic applications
The inductive, high-pressure-resistant IMP sensors are perfectly suited for the query of end positions in hydraulic cylinders.

Flat rectangular housings for use in industrial environments
When space is tight, the flat design of the IQV sensors are the best choice. Thanks to a low height, they can be easily integrated into applications where space is critical and allow a high degree of freedom when it comes to machine design.

NAMUR sensors for explosive zones
Safe detection in ATEX areas. The IMN sensors are available for this due to their high quality and reliability. No whether in category 1G or 2G, the NAMUR sensors from SICK are perfectly suited for explosion-hazardous areas.

Four times the switching capability with inductive intelligence
The inductive, intelligent, and, thanks to IO-Link 1.1, communication-enabled IMC proximity sensors offer a whole host of new options to make handling applications easier and more reliable in every industry.

The economical standard for use in industrial environments
SICK’s inductive sensors offer precise detection, less downtime, and a long service life. The IMW inductive sensors pack high technology into the smallest of spaces. The integrated ASIC chip enables digital adjustment after the end of the manufacturing process.

Reduction factor 1 sensors for welding applications
The IMR inductive proximity sensors are not the least bothered by magnetic interference fields or weld spatter, such as arise in resistance welding applications.

Rugged full metal sensors for use in challenging applications
In contrast to conventional proximity sensors, whose sensing face consists of plastic, the IMI inductive proximity sensors have a closed housing made completely of stainless steel.

Miniature sensors for industrial applications
Minimal space requirements paired with maximum performance characterize the IMM inductive proximity sensors. They allow the highest level of miniaturization without compromise. Thanks to the 3-fold sensing range up to 6 mm, IMM devices detect objects from a greater distance than before.

Rugged sensors for use in mobile machines
The IMS inductive proximity sensors combine tried-and-tested, rugged SICK mechanics with advanced electronics. With the E1 type approval by the German Federal Motor Transport Authority, the sensors are especially well-suited for use in mobile machines.

The simply outstanding all-rounder
The WFE is a rugged fork sensor that is simple and easy to mount. Thanks to its reliability and accurate detection, it is suitable for a large number of applications. The WFE can precisely detect objects up to a size of 0.5 mm with a high switching frequency of 5 kHz.

Slim, intelligent, intuitive to operate – universal solution for label detection
The innovative, small UFS fork sensor from SICK allows space-saving installation, for example directly on the dispensing edge of a labeling machine.

Fiber-optic sensor with stainless steel housing withstands harsh environmental conditions
The WLL260 stainless steel fiber-optic photoelectric sensor is characterized by its simplicity. Sensitivity control and light/dark switching features provide optimal possibilities for adjustment during operation.

The highest level of flexibility and economic efficiency - fibers from SICK
Special ambient conditions require special solutions. A common reason for use of fiber-optic sensors is tight installation space. Fibers from SICK can be laid flexibly at the most remote detection locations.

Powerful 2G fiber-optic sensor for explosive environments
Metal housing for very high stability and a long service life in harsh industrial environments characterize the WLL24 product family.

The smart solution for challenging detection tasks
With the WLL80 opto-electronic fiber optic amplifier, SICK is creating a new generation of amplifiers for the flexible integration of fiber optics in confined spaces. The intelligent WLL80 features IO-Link and can make processes even more efficient with various Smart Tasks.

Very short cylinder sensors with optical adjustment indicator for grippers
The MZCG VIA cylinder sensor detects the piston position in pneumatic grippers and pneumatic miniature cylinders.

Cylinder sensors with optical adjustment indicator for C-slot
The MZC1 VIA cylinder sensor from SICK is the flexible solution for detecting the piston position in pneumatic actuators. The MZC1 VIA can be mounted directly into all cylinders with standard C-slots.

Very short cylinder sensors for grippers
The MZCG cylinder sensor detects the piston position in pneumatic grippers and pneumatic miniature cylinders.

Cylinder sensors for IMI Norgren pneumatic cylinders and drives
The MZN cylinder sensor reliably detects the position of the magnetic piston in pneumatic cylinders and drives from IMI Norgren.