Sick Penang distributor

The economical standard for use in industrial environments
SICK’s inductive sensors offer precise detection, less downtime, and a long service life. The IMW inductive sensors pack high technology into the smallest of spaces. The integrated ASIC chip enables digital adjustment after the end of the manufacturing process.

Reduction factor 1 sensors for welding applications
The IMR inductive proximity sensors are not the least bothered by magnetic interference fields or weld spatter, such as arise in resistance welding applications.

Rugged full metal sensors for use in challenging applications
In contrast to conventional proximity sensors, whose sensing face consists of plastic, the IMI inductive proximity sensors have a closed housing made completely of stainless steel.

Miniature sensors for industrial applications
Minimal space requirements paired with maximum performance characterize the IMM inductive proximity sensors. They allow the highest level of miniaturization without compromise. Thanks to the 3-fold sensing range up to 6 mm, IMM devices detect objects from a greater distance than before.

Rugged sensors for use in mobile machines
The IMS inductive proximity sensors combine tried-and-tested, rugged SICK mechanics with advanced electronics. With the E1 type approval by the German Federal Motor Transport Authority, the sensors are especially well-suited for use in mobile machines.

The simply outstanding all-rounder
The WFE is a rugged fork sensor that is simple and easy to mount. Thanks to its reliability and accurate detection, it is suitable for a large number of applications. The WFE can precisely detect objects up to a size of 0.5 mm with a high switching frequency of 5 kHz.

Slim, intelligent, intuitive to operate – universal solution for label detection
The innovative, small UFS fork sensor from SICK allows space-saving installation, for example directly on the dispensing edge of a labeling machine.

Fiber-optic sensor with stainless steel housing withstands harsh environmental conditions
The WLL260 stainless steel fiber-optic photoelectric sensor is characterized by its simplicity. Sensitivity control and light/dark switching features provide optimal possibilities for adjustment during operation.

The highest level of flexibility and economic efficiency - fibers from SICK
Special ambient conditions require special solutions. A common reason for use of fiber-optic sensors is tight installation space. Fibers from SICK can be laid flexibly at the most remote detection locations.

Powerful 2G fiber-optic sensor for explosive environments
Metal housing for very high stability and a long service life in harsh industrial environments characterize the WLL24 product family.

The smart solution for challenging detection tasks
With the WLL80 opto-electronic fiber optic amplifier, SICK is creating a new generation of amplifiers for the flexible integration of fiber optics in confined spaces. The intelligent WLL80 features IO-Link and can make processes even more efficient with various Smart Tasks.

Very short cylinder sensors with optical adjustment indicator for grippers
The MZCG VIA cylinder sensor detects the piston position in pneumatic grippers and pneumatic miniature cylinders.

Cylinder sensors with optical adjustment indicator for C-slot
The MZC1 VIA cylinder sensor from SICK is the flexible solution for detecting the piston position in pneumatic actuators. The MZC1 VIA can be mounted directly into all cylinders with standard C-slots.

Very short cylinder sensors for grippers
The MZCG cylinder sensor detects the piston position in pneumatic grippers and pneumatic miniature cylinders.

Cylinder sensors for IMI Norgren pneumatic cylinders and drives
The MZN cylinder sensor reliably detects the position of the magnetic piston in pneumatic cylinders and drives from IMI Norgren.

Cylinder sensors with two sensor heads for C-slot
The MZC1 Twin cylinder sensor from SICK is the flexible solution for detecting the piston position in pneumatic actuators. The sensor can be inserted into cylinders very easily and, with the screw-and-washer assembly, tightened with just a quarter turn of a slotted screwdriver or hex key.

Cylinder sensors with two sensor heads for T-slot
The MZT8 Twin cylinder sensor from SICK is the flexible solution for detecting the piston position in pneumatic actuators. The sensor can be inserted into cylinders very easily and, with the screw-and-washer assembly, tightened with just a quarter turn of a slotted screwdriver or hex key.

Very short position sensors for grippers and miniature cylinders
MPS-G position sensors continuously detect the position of the fingers of a pneumatic gripper and the piston position in miniature cylinders using a non-contact method. The compactly built magnetic distance measuring system determines these positions with micrometer precision.

Short cylinder sensors for pneumatic grippers and miniature cylinders
The MZC2 cylinder sensor detects the piston position in pneumatic grippers and pneumatic miniature cylinders.

Reed contact cylinder sensors for IMI Norgren pneumatic cylinders and drives
The RZN reed contact cylinder sensor reliably detects the position of the magnetic piston in pneumatic cylinders and drives from IMI Norgren.

Position sensors for large pneumatic cylinders and drives
MPA position sensors continuously detect the piston position of pneumatic actuators using a direct, non-contact method. The sensors in the MPA product family are ideal for large piston diameters and long strokes.

Position sensors for C-slot
MPS-C position sensors continuously detect the piston position of pneumatic actuators using a direct, non-contact method. They can be mounted in C-slots without the need for additional accessories. The sensor settings can be adjusted during installation and during operation later on, using a teach field or IO-Link.

Adjustable individual thresholds
The RS10 is ideal for detecting print marks with low contrast or handling register marks with many different colors due to its individual threshold adjustment feature. Single screw mounting makes it easy to integrate and adjust in the machine. The round-shaped, white LED improves accuracy at high speeds.

Contrast detection using TwinEye-Technology in the tried-and-tested housing
Outstanding performance for a variety of applications, even in difficult conditions: The KTX contrast sensor with familiar hole pattern, high-precision RGB LED and VISTAL® housing impresses with TwinEye-Technology, color mode, high switching frequency, excellent

Small, simple, fast
Top performance for versatile, space-saving use in the packaging industry: The KTM contrast sensor from SICK features a high grayscale resolution and is integrated into a small, tried-and-tested housing that is also available in stainless steel.

Mini, easy, smart
The new CSM color sensor in the miniature housing offers accurate color detection and is IO-Link-capable. It is perfectly suited for applications in which color features need to be reliably detected while taking up as little installation space as possible. The sensor detects and monitors objects based on object color.

Smart and rugged capacitive sensors
The CMB capacitive proximity sensors detect objects and levels regardless of color, reflectance and gloss of the surfaces. In the process, they detect powdery, granulated, liquid and solid materials – even through non-metallic walls made of plastic or glass, for example.

Simply clever order picking verification
Using sensors for order picking has become standard in the automotive and logistics industries. Using the PLG automation light grid for order picking offers significant advantages over conventional, manual order picking technology.

The sturdy light grid for many standard applications
SICK offers the versatile ELG, an extremely tough switching automation light grid with different monitoring heights and beam separations. The ELG is not sensitive to glare caused by sunlight and flashing light.